The world’s most effective all-copper hunting bullet.

Since 1989, we’ve been engineering the most technologically advanced hunting bullets and ammunition on the planet.

The world’s most effective all-copper hunting bullet.

For 30 years, we’ve been engineering the most technologically advanced hunting bullets and ammunition on the planet.

When your tag matters,
use bullets you can trust.

Shop Ammunition


Shop
Bullets


Shop Muzzleloaders


New for 2021

When America’s hunters and shooters ask, we deliver ultimate precision.

Experience the effectiveness of all-copper bullets

Our all-copper bullets expand rapidly, dump more energy, and penetrate deeper than any lead-core bullet available.

Produce massive wound channels even in dense, thick-skinned game

Expands upon impact into four or six cutting petals

Tear through tissue, bone, and vital organs, allowing for deeper penetration

Barnes Ammunition

New product line:

Barnes JHP Centerfire Rifle Cartridges

This new cartridge is loaded with jacketed hollow-point lead-core bullets, premium components, and the same rigorous standards for shot-to-shot consistency we’ve built our name on.

hunting ammo:

barnes Reloading BULLETS

Featured:

TSX Bullets

All-copper bullets that have unmatched accuracy, reduced barrel fouling, and increased velocity.

Barnes Muzzleloaders

Featured:

Expander MZ

Say hello to the trifecta of deer-dropping performance.

Let's get technical.

Access all the loading data you need in one place.

since 1932

pioneering the world's most effective all-copper hunting bullet

We are pioneers.

As ballistic innovation evolves, Barnes all-copper ammunition continues to be the top pick for hunters and shooters worldwide.

We are Utah proud.

Uniquely located in the American epicenter of ballistic science, we are proud to call Mona, Utah home.

We are Barnes.

We are the most obsessed, dedicated, and passionate ammunition engineers and craftsmen on planet Earth.

When your tag matters,
use bullets you can trust.

Shop Ammunition


Shop
Bullets


Shop Muzzleloaders


Trusted by thousands of the world's best hunters and shooters.

Sign up for the Barnes Bulletin

We shoot straight with the latest news and updates on all things hunting, shooting, and Barnes Bullets.

Technical
Load Data

Technical load data

Find load data for your cartridge

New reloading data must be opened as a PDF document in an up-to-date compatible PDF viewer. For assistance, contact [email protected] or by phone at 800-574-9200.

Rifle

Handgun

muzzleloaders

Troubleshooting:

If the load charges appear to be blacked out on the PDFs, follow these steps:

  1. Save the pdf to your computer
  2. Open the file with Adobe Reader
  3. Go to edit > preferences > categories: page display
  4. In the rendering section, change the “Smooth Text” drop-down to “none”
  5. Click OK

If this does not solve the issue, customer service will send you a copy of the data. Contact them via email at [email protected] or by phone at 800.574.9200.

 

Disclaimer:

The load data contained on this site is intended for use with Barnes Bullets. Bullets from other manufacturers may not produce equivalent pressure or velocities; therefore, it is not recommended that this data be used with components other than as listed. Data contained herein is intended for use by individuals who are familiar with correct and safe handloading practices and procedures.

Because Barnes Bullets has no control over the individual loading practices and/or components used, no responsibility is implied or expressed by Barnes Bullets, Inc. in the use of this data. The information is to be used at the sole discretion of the user. This data replaces, supercedes and obsoletes any and all data previously published by Barnes Bullets, Inc.

Rifle

Loading Guidelines

When loading a Barnes TSX, Tipped TSX or LRX bullet, your rifle may prefer a bullet jump of anywhere between .050” up to .250” or more. This distance off the lands (rifling), aka “jump” may be limited to the rifles throat length, magazine length and bullet length.

When selecting the cartridge overall length (COAL) we recommend starting with a minimum “jump” of .050” off of the lands. You can test different seating depths and find a “sweet spot” that your particular firearm prefers. We suggest working in at least .025” increments as follows seating the bullet deeper to allow a further jump. Your test plan could look something like this:

1st group- .050” jump
2nd group- .075” jump
3rd group- .100” jump
4th group- .125” jump
5th group- .150“ jump
6th group- * see below

This length can be determined by using a “Stoney Point Gauge” or other methods. You do not have to seat the bullet at, or on one of the cannelure rings. Remember there are many factors that may control or limit the seating depth for your application. You may find that you need to start at around 0.150” off the lands and are not able to get any closer due to limiting factors including proper neck tension and magazine length.

*In rifles that have long throats you may be limited on how close you are able to get the bullet to the lands. In these instances, it is not uncommon to find the best accuracy with a jump of .200” or more.

This jump may possibly stay the same regardless of powder or charge weight within a given rifle. If preferred accuracy is not obtained, we certainly recommend trying another powder, for the powder type and charge greatly affects the overall accuracy of each individual firearm.

FYI- An accurate load requires a bullet with the proper consistent case neck tension which leads to more constant pressures and velocities.

The twist rate is measured by how many inches of bullet travel down the barrel it takes the rifling to twist the bullet one full turn. This measurement is called the “rate of twist” and is expressed as a ratio, such as 1:7, which means the bullet spins one full rotation in seven inches of barrel travel. The lower the ratio the faster the rate of twist.

In testing we have found the TSX, TTSX, and LRX bullets to be very accurate. Handloader Magazine often prints their test results in which Barnes TSX, TTSX, and LRX bullets produce accuracy results that are just as good, if not better than match-grade bullets. A number of shooting schools use Vor-tx and Vor-tx LR ammunition loaded with the TSX, TTSX, and LRX bullets as their ‘go to’ brand to verify accuracy when a students rifle and ammunition does not produce acceptable results.

Have questions?

Contact us for technical support, product selection, sales, warranty/returns, product availability, marketing, and more.

Mon–Thurs
7:30am – 5:00pm MST

800-574-9200
435-856-1000

Safety Data Sheets

Safety Data Sheets

Safety Data Sheets

Safety Data Sheets (SDS) are detailed documents prepared by the manufacturer or importer of a hazardous chemical. They contain information on the physical and chemical properties of the product and provide useful information such as flash point, toxicity, procedures for spills and leaks, and storage guidelines.

SDSs are required under the OSHA Hazard Communication Standard for certain items or chemicals used in the workplace. The information in the document:

Aids in the selection of safe products

Help you understand potential health and physical hazards of a chemical

Describes how to respond effectively to exposure situations

SDS

Bullets

– Click to download –

Traditional Lead Core Bullets

Match Burner
Varmin-a-tor
Buster
Original


DOWNLOAD SDS

Copper Alloy Bullets

Banded Solids
M/LE TAC-LR


DOWNLOAD SDS

Powdered Metal Core Bullets

Varmint Grenade
RRLP™
MPG™


DOWNLOAD SDS

SDS

Loaded Ammunition

– Click to download –

Rifle Ammunition with Traditional Lead Core Bullets

Precision Match
Barnes Multi-Purpose Ammunition
PIONEER ™ with Original Bullets


DOWNLOAD SDS

Rifle Ammunition with Zinc-core Bullets

Range AR® Rifle


DOWNLOAD SDS

Rifle Ammunition with Copper Alloy Bullets

VOR-TX® Rifle Ammunition with Banded Solid bullets


DOWNLOAD SDS

Rifle and Handgun Ammunition with All-Copper Bullets

VOR-TX® Rifle
VOR-TX® Safari
VOR-TX® Euro
VOR-TX® Long Range
VOR-TX® Handgun
VOR-TX® Reduced Recoil
PIONEER™ Ammunition with TSX® or XPB® Bullets
TAC-XPD Defense Handgun


DOWNLOAD SDS

Rifle Ammunition with Copper:Tin Powdered Metal Core Bullets

Barnes RRLP™ (Reduced Ricochet, Limited Penetration) Ammunition

Barnes MPG™ (Multi-Purpose Green) Ammunition


DOWNLOAD SDS

Shotshell Ammunition with lead shot, buckshot (lead and lead core)

Defense Buckshot




DOWNLOAD SDS

Shotshell Ammunition with All-Copper Bullets

VOR-TX Shotshell




DOWNLOAD SDS

SDS

Bore Cleaner

– Click to download –

Bore Cleaner

CR10 2oz. and 8oz. Bottles


DOWNLOAD SDS

Exemption Letters

Not all materials require SDSs and may be exempt from this requirement if they meet the definition of “Article” in the Hazard Communication Standard (29 CFR 190. 1200(b)(v)). For Barnes products that meet the Article definition, see exception letters below.

Have questions?

Contact us for technical support, product selection, sales, warranty/returns, product availability, marketing, and more.

Mon–Thurs
7:30am – 5:00pm MST

800-574-9200
435-856-1000

Legal

Legal